1. Imasogie, B.I.; Afonja, A.A. and Ali, J.A (2000). Properties of Ductile Cast Iron Nodularised with Multiple Calcium-Magnesium Based Master Alloy. Materials Science and Technology, Vol. 16, No. 2, 194-201.
2. Imasogie, B. I; Afonja, A. A. and Ali, J. A (2001) Properties of As-Cast and Heat Treated Nodular Graphite Cast Irons, Melts Treated with CaSi-CaF₂ Scandinavian Journal of Metallurgy, Vol. 30, Issue 2, 91-102.
3. Imasogie, B. I (2003) Microstructural Features and Mechanical Properties of Compacted Graphite Iron Treated with Calcium-Magnesium Based Masteralloy. Journal of Materials Engineering and Performance, Vol. 12, No. 3, 239-243.
4. Imasogie, B. I. and Wendt U. (2004) Characterisation of Graphite Particle Shape in Spheroidal Graphite Iron Using a Computer-based Image Analyzer. Journal of Minerals and Materials Characterization and Engineering, Vol. 3, No.1, 1-12.
5. Olorunniwo, O. E. and Imasogie, B. I. (2005) Internal Corrosion Monitoring and Control in Sour Gas Systems. Materials performance, Vol. 44, No. 8, 36-39.
6. Yang, Y.; Imasogie, B. I; Allameh, S. M.; Boyce, B.; Lian, K.; Lou, J. and Soboyejo, W. O. (2007) Mechanisms of Fatigue of LIGA Ni MEMS Thin Films. Materials Science and Engineering A; Vol. 444, 1-2, 39-50.
7. Yang, Y.; Yao, N. Imasogie, B. I. and Soboyejo, W. O. (2007) Nanoscale and submicron fatigue crack growth in Nickel microbeams. Acta Materialia, Vol. 55, 4305–4315.
8. Yang, Y. Allameh, S., Lou, J., Imasogie, B. I., Boyce, B. L. and Soboyejo, W. O. (2007), Fatigue of LIGA Ni Micro-Electro-Mechanical-System Thin Films, Metall & Matls. Trans. A, Vol. 38, No. 13, 2340-2348.
9. Oluwole, O.O., Atanda, P. O. and Imasogie, B. I. (2009). Finite Element Modeling of Heat Transfer in Salt Bath Furnaces, Minerals and Materials Characterization and Engineering, Vol. 8. No. 3, 229-236.
10. Yang, Y.; Imasogie, B. I;. Fan, G. J. Liaw, P. K. and Soboyejo, W. O (2008) Fatigue and Fracture of a Bulk Nanocrystalline Ni-Fe alloy, Metallurgical and Materials Transactions A. 39A, No. 5, 1145-1156.
11. Oluwole, O.O., Atanda, P. O. and Imasogie, B. I. (2009). Finite Element Modeling of Heat Transfer in Salt Bath Furnaces, Journal Minerals and Materials Characterization and Engineering, Vol. 8. No. 3, 229-236.
12. Olorunniwo, O. E., Imasogie, B. I. and Afonja, A. A. (2007) Evaluation of Pipeline Corrosion in Sour-Gas Environment. Anti-Corrosion Methods and Materials. Vol. 54, No. 6, 346-353.
13. Atanda, P. O; Olorunniwo, O. E; and Imasogie, B. I. (2013). Effect of Ca–Mg and Mg-FeSi Graphite Nodularizers on the Nodular Graphite Characteristics of Ductile Cast Irons. Materials Performance and Characterization, Vol. 2 (1), 391–399, 2165-3992.
14. Imasogie, B. I. (2016). Spheroidal Graphite Iron – Characterization. In Encyclopedia of Iron, Steel and Their Alloys. Chapter 5. Pp. 3237-3254. Metals and Alloys Encyclopedia Collection Series. CRC Press. Taylor & Francis Publishers. New York. ISBN-13:978-1466511040. 2016.

Imasogie, B. I. (2016). Engineering Materials – Prime Movers of Global Technological Development and Innovation. Obafemi Awolowo University Inaugural Lecture Series 289. ISSN 0189-7848. Obafemi Awolowo University Press Limited. August 2016.

1. Adeleke A. A., Ibitoye S. A., Oladokun C. B. and Oluwasegun K. M. (2011); An Evaluation of the Hot Aqueous Caustic Leaching of Nigerian Ondo Tar Sand, Petroleum & Coal, 53 (4), 320-323. Slovakia
2. Olawale J. O., Ibitoye S. A., Shittu M. D. and Popoola A.P.I. (2011); A Study of Premature Failure of Crusher Jaws, Journal of Failure Analysis and Prevention, 11(6), 705 – 709.S.A.
3. Shittu M. D., Ibitoye S. A., Olawale J. O. and Popoola A. P. I. (2012); Superheat influence on mechanical properties of cast hypoeutectic aluminium–silicon alloy, International Journal of Cast Metals Research, 25(3), 170 – 175. Brazil
4. Tiamiyu A. O. and Ibitoye S. A. (2012); Effect of clay addition on service properties of a developed OPF–CNSL–formaldehyde roofing material, Construction and Building Materials, 36 (2012), 358–364. S.A.
5. Aramide F. O. and Ibitoye S. A. (2012); Effects of Melt Vibration During Solidification on the Mechanical Property of Mg-Al-Zn Alloy, International Journal of Metallurgical Engineering,1(3): 40-43. S.A.
6. Ayeni F.A., Ibitoye S.A. and Adeleke A.A. (2012); Develoment of A Wet Magnetic-Gravity Processing Route to Recover Columbite from Jos Tailings Dump, Nigeria, Journal of Mining and Metallurgy Section A: Mining, 48 A(1), 63-72. S.A.
7. Shittu M.D., Ibitoye S.A., Olawale J.O. (2012); Mechanical Properties of Cast Hypoeutectic Al-Si Alloy in Hexachloroethane-coated Mould, Journal of Engineering Science & Technology, 7(4), 529 – 539. K.
8. Adeleke A.A., Ibitoye S.A., Enajero M.O., Popoola A.P.I. (2)012); Multistage Dilute Acid Leaching of a Low Grade Iron Ore , Journal of Engineering Research, 17, 15-21. Kuwait
9. Adeleke A. A., Ibitoye S. A. and Afonja A. A. (2013); Multistage Caustic Leaching Desulphurization of a High Sulphur Coal, Petroleum & Coal, 55 (2) 112-117. Slovakia
10. Ibitoye S. A., Adeleke A.A., Aramide F.O., Olawale J. O., Tiamiyu A. O., Oluwasegun K. M., Abdul-Kareem T. M. and Shittu M. D. (2013); Some Mechanical Properties of SiC-Treaed Rycycled HDPE, International Journal of Materials and Chemistry, 3(3), 45 – 60. Malaysia
11. Ibitoye S.A., Olawale J.O. and Shittu M.D. (2014); Influence of Cement-Silica Ratio on the Moulding Properties of Portland Cement Bonded Sand, Journal of Physical Science, 25(1), 113 – 123. Malaysia
12. Ibitoye S.A. and Alo O. (2014); Adaptation of Odolewu Clay for Use as Refractory Material, International Journal of Scientific & Engineering Research, 5(4), 837 – 843.
13. Olawale J. O., Ibitoye S. A., Oluwasegun K. M. (2016); Processing Techniques and Productions of Ductile Iron: A Review, International Journal of Scientific & Engineering Research, 7(9), 397 – 423.
14. Olawale J. O. and Ibitoye S. A., K. M. Oluwasegun, M. D. Shittu and A. P. I. Popoola (2017); Forced-Air Cooling Quenching: A Novel Technique for Austempered Ductile Iron Production, International Journal of Metalcasting, 11(3), 568-580. K.
15. Olawale J. O. and Ibitoye S. A., and Oluwasegun K. M. (2017); Quantitative Evaluation of Carbon-enriched Stabilized Austenite in Cast Austempered Ductile Iron of Varying Section Thickness, Nigerian Journal of Materials Science and Engineering, 7, 1-9.
16. Malomo B., Fadodun O., Oluwasegun K., Ogunbodede A., Ibitoye S. and Adekoya L. (2017); On The Solidification Characteristics and Mechanical Properties of Aluminum Alloy Aa 6061/Al2o3-Sicp Composite Produced by High Pressure Die Casting, Journal of Engineering Science and Technology, 12(7), 1804 – 1818. S.A.
17. Olawale J.O. and Ibitoye S.A. (2017); Influence of Casting Section Thickness on Fatigue Strength of Austempered Ductile Iron, Journal of Materials Engineering and Performance, 26(10), 4997 – 5008. S.A.
18. Shittu M. D., Ibitoye S. A., Atanda P. O., Olawale J. O., Oluwasegun K. M. and Ige O. O. (2018); Automation of Gating System Parameters for Green Sand Iron Castings, Journal of Advances in Mathematics and Computer Science, 27(6): 1-15. K.
19. Olawale J. O., Ibitoye S. A. and Oluwasegun K. M. (2018); Effects of Section Thickness on the Microstructure and Mechanical Properties of Austempered Ductile Iron, Journal of Materials Sciences and Applications. 4(2), 17-30. S.A.

Inyang AO, Ibitoye S. A. (2018); Quality assessment of hydroxyapatite derived from bovine bone wastes, Int J Appl Ceram Technol, 15:1439–1445. https://doi.org/10.1111/ijac.13020 U.S.A.

• Nwoko, V.O. and Umoru, L.E. (2000) Corrosion of Mild Steel in some Environments. Nigeria Journal of Corrosion Vol.1, no.1, Pp. 61-64.
• Umoru, L.E., Imasogie, B.I. and Olajumoke A.M. (2003) Corrosion characteristics of NST-37-2 and NST-60 Mn steel reinforcement in concrete under different environmental conditions, NSE Technical Transactions, Vol. 38 No. 1 pp 56-65.
• Akinola, A.P., Layeni, O.P., Odejobi, O.A. and Umoru, L.E. (2004) Hold effect in Finite Torsion of a compressible elastic tube, J. Appl. Math & Computing Vol. 16, No. 1-2, pp 323-336.
• Umoru, L.E., Ali, J.A. and Afonja, A.A. (2005) Effect of calcium on the degree of nodularization of cast iron, NSE Technical Transactions, Vol. 40 No. 2 pp 33-42.
• Umoru, L.E., Onike, A. and Ige O. O. (2005). Glucose as a corrosion inhibitor for an aluminum alloy in 0.1M sodium hydroxide, NSE Technical Transaction, Vol. 40, No. 4, pp. 45-52.
• Umoru, L.E. (2005). Evaluation of the effect of curing variables on the corrosion of reinforced concrete in a seawater environment, Ife Journal of Technology, Vol. 14 No.1.
• Umoru, L.E., Ali, J.A. and Afonja A.A. (2007) Evaluation of the influence of Bainitic Transformation on some Properties of Calcium-treated Cast Iron, Journal of Minerals and Materials Characterization and Engineering, Vol. 6 No. 2 pg 109-120.
• Oke, I.A., Umoru,L.E. and Ogedengbe, M.O. (2007) Properties and stability of a carbon-resin electrode, Materials and Design 28 No.7, pp 2251-2254.
• Oke, I.A. Umoru, L.E. and Ogedengbe, M.O. (2006) 2^k Factorial Experiments on Factors That Influence Stability of Carbon Resin Electrodes, FUTAJEET Vol 5 No: 2  135 – 141.           
• Umoru, L.E., Afonja, A.A. and Ademodi, B. (2007) Effects of some heat treatments on the corrosion resistance of NST 60-Mn steel in a tar sand digester, Corrosion and Materials, Vol. 32 No.2 pp. 11-15.
• Fasasi, A.Y., Imasogie, B.I., Siyanbola, W.O., Umoru, L.E., Ogunleye, P.O. and Bankole, A. (2007) Analyses of high voltage transmission cables in South Western Nigeria, Ife Journal of Applied Science, Vol.9 No.5 pg.   
• Umoru, L.E. and Ige, O.O. (2007) Effects of tin on Aluminium-Zinc-Magnesium alloy as sacrificial anode in seawater, Journal of Minerals and Materials Characterization And Engineering, Vol.7, No.2, pp 105-113. USA
• Adetunji, A.R., AttahDaniel, B.E., Adeoye, M.O., Umoru, L.E., Adeeyinwo,C.E., Pelemo, D.A., Olasupo, O.A. and Adewoye, O.O. (2008) Metallographic studies of   pack cyanided mild steel using cassava leaves, Materials and Manufacturing Processes, 23, No. 4, pp. 385-390.
• Bello, K.A., Hassan, S.B. Abdulwahab, M., Shehu, U., Umoru, L.E., Oyetunji, A. and Suleiman, L.Y. (2007) Effect of ferrite-martensite microstructural evolution on hardness and impact toughness behaviour of high martensite dual phase steel, Australian Journal of Basic and applied Sciences, Vol. 1 No. 4, pp 407-414.
• Umoru, L.E., Afonja, A.A. and Ademodi, B.(2008) Corrosion study of AISI 304, AISI 321 and AISI 430 stainless steels in a tar sand digester. Journal of Minerals and Materials Characterization and Engineering, Vol.7, No.4, pp 291-299.
• Umoru, L.E. (2008). Effect of weld type and post weld heat treatment on the corrosion resistance of AISI 321 stainless steel in a tar sand digester Emirates Journal for Engineering Research, 13, No. 2, Pp. 45-50.
• Oke, I.A. Umoru, L. E., Oladepo K.T. and Ogedengbe, M.O. (2008) Utilization of Weibull Techniques to describe stability distribution of carbon resin electrodes, Ife Journal of Technology, IJT, 17, No. 1, Pp35-46.
• Alagbe, M., Umoru, L.E., Afonja, A.A. and . Olorunniwo, O.E. (2009) Investigation Of The Effect Of Different Amino-Acid Derivatives On The Inhibition Of Nst-44 Carbon Steel Corrosion In Cassava Fluid, Anti-Corrosion Methods and Materials,Vol. 56, No. 1, Pp. 43-50.
• Atanda, P.O., Olorunniwo, O.E., Umoru, L.E. and Adeyeye, A.D. (2009) A study of process parameters on the carburization of C2R steels, Journal of Minerals and Materials Characterization and Engineering, Vol. 8, No. 2, Pp 79-92.
• Odejobi, O.A. and Umoru, L.E. (2009) Applications of soft computing techniques in materials engineering: A review, African Journal of Mathematics and Computer Science Research (AJMCSR), Vol. 2 (7), pp. 104–131.
• Olajumoke, A.M., Umoru, L.E. and Olawale, O.O. (2009) Property characterization of concrete with ground glass as partial replacement for cement S.E Technical Transactions Vol.44, No.3 Pp.68-84.
• Olorunniwo, O.E., Umoru, L.E. and Atanda, P.O. (2009), The study of diethylene amine and sodium chromate as corrosion inhibitors for mild steel in cassava fluid, Ife Journal of Technology, Vol.18 No.2, pp 31-34.
• Ige, O.O., Umoru, L.E., Adeoye, M.O., Adetunji, A.R., Olorunniwo, O.E. and Akomolafe, I.I. (2009) Monitoring, control and prevention practices in corrosion of biomaterials – An Overview, Journal of Trends in Biomaterials and Artificial Organs. 23(2), 93 – 104.
• Ogundare, O., Umoru, L.E., Olorunniwo, O.E. and Adetunji, A.R. (2009) Evaluation of corrosion co-inhibition characteristics of sodium tungstate with sodium silicate on low carbon steel in 0.085M hydrochloric acid, Nigerian Journal of Materials Science and Engineering (NJMSE),1, No.1, Pp43-47.
• Ige, O.O. and Umoru, L.E.,  (2009). Effects of precipitation hardening variable on  an aluminium-zinc-magnesium-tin alloy as sacrificial anode in seawater, Nigerian Journal of Engineering.16, No.1,  Pp20-29.
• Olorunniwo, O.E., Umoru, L.E. and, Atanda, P.O. (2010) The Effect of Additives on the Properties of Clay Used as a Refractory Material, NSE Technical Transactions, Vol. 45, No.2, Pp11-20.
• Oluwasegun, K. M., Umoru, L.E. and Ibitoye, S.A.(2010) Microstructural characterization of the TMAZ of inertia friction welded (IFW) PM nickel base superalloy,RR1000, Nigerian Journal of Engineering, NJE,17, No.1, Pp 74-83.
• Oluwasegun, K. M., Umoru, L.E. and Ibitoye, S.A.(2010) The importance of γ’ liquation on the microfissuring of thermomechanically affected zone in inertia friction welding of PM RR1000 superalloy. Journal of Metallurgical and Materials Engineering
• Adeoye,M.O., Olorunniwo, O.E.,  Atanda, P.O. and  E. Umoru (2010). Effects of fiber orientation on mechanical properties of polymer matrix composites, Ife Journal of Technology, IJT, Vol.19, No.2, P. 8-10.
• S A., Adeoye, M.O.  Atanda, P.O., Umoru, L.E. and Oyatogun, G.M. (2010). Effect of bulk density on the shear strength clay-sodium silicate bonded moulding sand, Ife Journal of Technology, IJT, Vol.19, No.2, P. 38-41.
• Akomolafe, I.I., Umoru, l.E. and Ige O.O.(2011) Influence of glass frits on working properties of kaolins, Applied Clay Science, Vol. 52, No. 4, . 428-431.
• Ige, O. O., Umoru, L.E., Olorunniwo, O.E., Adeoye, M. O. (2011): Erosion corrosion in the oil and gas industry: A review, Ife Journal of Technology, 20(1), 58 – 67. Nigeria
• Oyatogun, G.M., Adeoye, M.O., Olorunniwo, O.E. and Umoru, L.E.(2011) Failure Analysis of a Ruptured Trunkline, Journal of Failure Analysis and Prevention, Vol.11, Issue 5, 523-529.
• Alo, O.A., Umoru, L.E., Ajao, J.O. and Oluwasegun, K. M. (2012) . Thermal, Hardness and Microstructural Characterization of Al-Si-SiC_p Composite Journal of Minerals and Materials Characterization (JMMCE) 11, No. 2, Pp 159-168. 
• Akinluwade, K. J., Adetunji, A. R., Adeoye, M. O., Umoru, L. E., Kalu, P. N., Taiwo, A. T. and Adewoye, O. O. (2012). Development of an Environmentally Friendly in-situ Pack-Cyaniding Technique. Journal of Minerals & Materials Characterization & Engineering, Vol. 11, No.1, pp.21-30. USA
• Ige, O.O., , L. E., Sunday, A. (2012): Natural products: A minefield of biomaterials, International Journal of Biomaterials, Volume 2012, Article ID 983062, 20 pages doi:10.5402/2012/983062.  
• Umoru, L. E., Oladipo, and Ige, O. O. (2012). Carbonate Coatings as protective Barriers for Pipe Borne Water Transport Material, Journal of Minerals and Materials Characterization (JMMCE) 11, No. 6, Pp 609-617.
• Ige, O. O., Shittu, M. D., Oluwasegun, K. M., Olorunniwo, O. E. and Umoru, L. E. (2012) Eco-Friendly inhibitors for erosion corrosion mitigation of API-X65 steel in CO₂ environment, Ife Journal of Technology (IJT),21, No.2, Pp. 43-48.
• Ige, O.O., Barker, R., Hu, , Umoru, L. E. and Neville, A. (2013) Assessing the influence of shear stress and particle impingement on inhibitor efficiency through the application of in-situ electrochemistry in a CO₂-saturated environment, Wear, Vol.304, Issues1-2 Pp. 49-59.
• Akinluwade, K . J, Adetunji, A. R., Adeoye, M., Umoru, L. E., Taiwo, A. T., Kalu, P., Rominiyi, A.,Isadare, D. A., Soboyejo, W.W and Adewoye, O. O. (2013). Light and Electron Microscopy Studies of the Visible Diffusion Zone of Mild Steel Pack Cyanided in Processed Cassava Leaves. Journal of Materials Science and Engineering B 3 (9), 567- 570.  
• Daniyan, A. A., Umoru, L. E. and Olunlade, B. (2013). Preparation of Nano-TiO₂ Thin Film Using Spin coating Method, Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol.1 No.4, Pp. 138-144.  
• Daniyan, A. A., Umoru, L. E., Fasasi, A. y., Borode, J.O., Oluwasegun, K. M. and Olusunle S.O.O.(2014). Electrical Properties of Nano-TiO₂ Thin-film using Spin-coating Method, Journal of Minerals and Materials Characterization and Engineering (JMMCE)2 No.1 Pp. 15-20.
• Adamu Mohammed, Umoru, L.E., and Ige, O.O. (2014) Effect of Toluene and Dioctylphthalate on Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid, Journal of Minerals and Materials Characterization and Engineering (JMMCE),Vol.2, No.1, Pp. 1-7
• Adamu Mohammed, Umoru, L.E., and Ige, O.O. (2014) Effect of Calcium Nitrate   and Sodium Nitrite on Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid, Journal of Minerals and Materials Characterization and Engineering (JMMCE), Vol.2, No.3, Pp. 223-229.                
• O. Ige and L.E. Umoru. (2016) Effects of shear stress on the erosion‐corrosion behaviour of X-65 carbon steel: A combined mass-loss and profilometry study. Tribology International 94, 155-164.
• Ilori , O. O., Adetan D. A., Umoru, L. E. and Idowu, I. A. (2017) Effect of Cutting Parameters on the Surface Roughness Generated during Face Milling of Pearlitic Ductile Iron with Cemented Carbide Tool, International Journal of Science and Technology 6, No. 2, Pp. 678-688.
• Ilori , O. O., Adetan D. A. and Umoru, L. E.. (2017) Effect of Cutting Parameters on the Surface Residual Stress of Face Milled Pearlitic Ductile Iron, International Journal of Materials Forming and Machining Processes,   4, No. 1 Pp 38-52.
• Popoola, A.P.I., Daniyan, A.A., Umoru, L. E. and Fayomi, O.S.I. (2017) Effect of WO₃ Nanoparticle Loading on the Microstructural, Mechanical and Corrosion Resistance of Zn Matrix/TiO₂-WO₃ Nanocomposite Coatings for Marine Application, Journal of Marine Science and Application, March 2017, 16, No.1, pp 102–109.
• Daniyan, A. A., Umoru, L. E., Popoola, A. P. I and Fayomi, O. S. I. (2017) Comparative studies of microstructural, tribological and corrosion properties of Zn-TiO₂ and Zn-TiO₂-WO₃ nano-composite coatings, Results in Physics, Vol. 7, Pp 3222-3229.
• Daniyan, A. A., Umoru, L. E., Popoola, A. P. I. and Fayomi, O. S. I.(2018) Opto-electrical and corrosion properties of electro-co-deposited Zn-TiO₂/WO₃-ZnO-SnO₂ nano-composite coatings, Materials and Corrosion, DOI: 10.1002/maco.201709722.
• Fayomi, O. S. I., Daniyan, A. A., Umoru, L. E. and Popoola, A. P. I. (2018). Data on the effect of current density relationship on the super composite coating by electrolytic route, Data in Brief, Vol. 18, Pp 776-780

Effect of heat treatment on some mechanical properties of 7075 aluminium alloy

AD Isadare, B Aremo, MO Adeoye, OJ Olawale, MD Shittu

Materials Research 16 (1), 190-194

Shear assay measurements of cell adhesion on biomaterials surfaces

G Fu, C Milburn, S Mwenifumbo, Y Cao, GM Oparinde, MO Adeoye, …

Materials Science and Engineering: C 29 (4), 1293-1301

Investigation of the spreading and adhesion of human osteosarcoma cells on smooth and micro-grooved polydimethylsiloxane surfaces

Y Cao, J Chen, MO Adeoye, WO Soboyejo

Materials Science and Engineering: C 29 (1), 119-125

Monitoring, control and prevention practices of biomaterials corrosion–an overview

OO Ige, LE Umoru, MO Adeoye, AR Adetunji, OE Olorunniwo, …

Trends Biomaterials Artificial Organs 23, 93-104

Investigation of effects of Argenine–Glycine–Aspartate (RGD) and nano-scale titanium coatings on cell spreading and adhesion

C Milburn, J Chen, Y Cao, GM Oparinde, MO Adeoye, A Beye, …

Materials Science and Engineering: C 29 (1), 306-314

Development of an environmentally friendly in-situ pack-cyaniding technique

KJ Akinluwade, AR Adetunji, MO Adeoye, LE Umoru, PN Kalu, AT Taiwo, …

Journal of Minerals and Materials Characterization and Engineering 11 (01), 21

Metallographic studies of pack cyanided mild steel using cassava leaves

AR Adetunji, BEA Daniel, DA Pelemo, OA Olasupo, MO Adeoye, …

Materials and Manufacturing Processes 23 (4), 385-390

A simplified microcontroller based potentiostat for low-resource applications

B Aremo, MO Adeoye, IB Obioh, OA Adeboye

Open Journal of Metal 5 (4), 37-46

Influence of mould heat storage capacity on properties of grey iron

AV Adedayo, B Aremo

Journal of Minerals and Materials Characterization and Engineering 10 (04), 387

Light and electron microscopy studies of the visible diffusion zone of mild steel pack cyanided in processed cassava leaves

AK Joseph, AR Adetunji, M Adeoye, LE Umoru, AT Taiwo, P Kalu, …

Journal of Materials Science and Engineering. B 3 (9B), 567

Struc-tural and Optical Properties of Tin Doped Zinc Oxide Fibres Prepared By Electrospinning Technique

ED Adelowo, AY Fasasi, MO Adeoye, SO Alayande

Chemistry and Materials Research 3 (13), 96-106

Development of a Roofing Material from Polyethylene through the Use of Additives

B Aremo, MO Adeoye

Journal of Materials in Civil Engineering 20 (8), 516-520

Beneficiation and Characterization of Gold from Itagunmodi Gold Ore by Cyanidation

OD Ogundare, MO Adeoye, AR Adetunji, OO Adewoye

Journal of Minerals and Materials Characterization and Engineering 2 (04), 300

Oluyemi John Olawale

AD Isadare, B Aremo, MO Adeoye

Moshood Dehinde Shittu” Effect of Heat Treatment on Some Mechanical …

Aluminium Countergravity Casting–Potentials and Challenges

B Aremo, MO Adeoye

Recent Trends in Processing and Degradation of Aluminium Alloys

A low-cost vacuum casting equipment for aluminium alloys

B Aremo, MO Adeoye

Russian Journal of Non-Ferrous Metals 51 (2), 124-130

Comparative Evaluation of Rotary and Crucible Melting Furnaces Efficiencies

JK Akinluwade, MO Adeoye

NSE Technical Transaction 42 (3), 30-43

Effect of as-cast cooling on the microstructure and mechanical properties of agehardened 7000 series aluminium alloy

D Isadare, M Adeoye, A Adetunji, K Oluwasegun, A Rominiyi, …

International Journal of Materials Engineering 5, 5-9

Oluyemi John Olawale,“Effect of heat treatmenet on some mechanical properties of 7075 aluminium alloys” Mat

AD Isadare, B Aremo, MO Adeoye

Res 16 (1)

Failure analysis of a ruptured trunkline

GM Oyatogun, MO Adeoye, OE Olorunniwo, LE Umoru

Journal of failure analysis and prevention 11 (5), 522-529

Composites, Multifunctional

AM Karlsson, MO Adeoye

Investigation of hardness anisotropy in tourmaline

MO Adeoye, OO Adewoye

Journal of Minerals and Materials Characterization and Engineering 3 (02), 99

Effects of Microstructures on the Thermal Properties of Refractory Materials.

MO Adeoye

Obafemi Awolowo University

Pack-cyaniding: A Comparative Study of Low and High-Temperature Treatment

KJ Akinluwade, AL Rominiyi, DA Isadare, AR Adetunji, MO Adeoye

Archives of Current Research International, 1-12

A Starch-Based Biodegradable Polyethylene for Municipal Solid Waste Mitigation

A Raheem, B Aremo, MO Adeoye

Materials Sciences and Applications 8 (01), 26

A simplified test station for alkaline fuel cell

B Aremo, MO Adeoye, IB Obioh

Journal of Fuel Cell Science and Technology 12 (2), 024501

Optimization of mechanical properties of age-hardened 6063 aluminium alloy via diffusion annealing

DA Isadare, MO Adeoye, AR Adetunji, KM Oluwasegun, KJ Akinluwade

Current Journal of Applied Science and Technology, 3360-3369

Investigation of corrosion resistance of polystyrene as an inhibitor in hydrochloric and tetra-oxo sulphate VI acids

MD Shittu, JO Olawale, MO Adeoye, KM Oluwasegun, KM Adebayo, …

Int. J. Mater. Chem. 4 (1), 9-13

Processing, Characterization and Investigation of Suitability of Cowry Shells for Bone Graft Application.

OG Modupe, ET Ayodeji, OE Obhioneh, KE Adebiyi, TR Adetoro, EO Dare, …

Journal of Osteology & Biomaterials 3 (1)

Effect of buffer solutions on the flow and fracture in calcite

SOO Olusunle, WO Siyanbola, AR Adetunji, OO Adewoye

Journal of Minerals and Materials Characterization and Engineering 8 (03), 189

Crystallite size determination of thermally deposited Gold Nanoparticles

OD Ogundareab, OJ Akinribideac, AR Adetunjib, MO Adeoyeb, …

Procedia Manufacturing 30, 173-179

Characterization of Mild Steel Case-hardened in Processed Cassava Leaves

DA Isadare, MO Adeoye, AR Adetunji, KM Oluwasegun, KJ Akinluwade, …

Archives of Current Research International, 1-11

Modeling of Heat Transfer in Rotary Furnaces Using Finite Element Approach

MO Adeoye, DA Isadare, FP Ibitoye, KJ Akinluwade, AR Adetunji

Materials Performance and Characterization 7 (1), 59-69

Potentiostatic Co-deposition of Nickel and Graphite Using a Composite Counter Electrode

B Aremo, MO Adeoye, IB Obioh

J Nanosci Curr Res 2 (116), 2572-0813.1000116

An Evaluation of Sodium Ethyl Xanthate for the Froth Flotation Upgrading of a Carbonatitic Copper Ore

MF Mokgethwa, AA Adeleke, P Mendonidis, MO Adeoye

Journal of Physical Science 27 (2), 13

The Influence of Homogenization Treatment on Aging Response of 6063 Aluminium Alloy

DA Isadare, MO Adeoye, AR Adetunji, KM Oluwasegun, KJ Akinluwade

Advances in Research, 1-11

Design and Construction of a Vacuum Casting Equipment for Aluminium Alloys

B Aremo

Appraisal of Solution Heat Treatment on Elimination of Hafnium Rich γ–γ′ Eutectic and Prior Particle Boundary Precipitate in a Superalloy Powder

KM Oluwasegun, JO Olawale, MO Adeoye, OE Olorunniwo, OO Ige, …

Materials Performance and Characterization 3 (1), 342-354

Electroforming of a Complex Mould Using an Acid-Mediated Copper Sulphate Bath

RT Ojo, C Edechuku, B Aremo, MO Adeoye, OS Teniola

Open Journal of Metal 4 (02), 9

Failure Analysis of a Shaft-Coupling Bracket

OA Olanrewaju, MO Adeoye, JO Olawale, MD Shittu

Materials Performance and Characterization 2 (1), 308-318

Effects of Increasing Nano-Scale Coating Thickness of Titanium on the Interaction of Silicon with Cancer Cells

GM Oyatogun, WO Soboyejo, AA Afonja, BI Imasogie, OO Adewoye, …

Ife Journal of Technology 22 (1), 9-14

The Effects of Fiber Orientation on Mechanical Properties of Polymer Matrix Composites

MO Adeoye, OE Olorunniwo, PO Atanda, LE Umoru

Ife Journal of Technology 19 (2), 8-10

Effect of Bulk Density on the Shear Strength of Clay-Sodium Silicate Bonded Moulding Sand

SA Ibitoye, MO Adeoye, PO Atanda, LE Umoru, GM Oyatogun

Ife Journal of Technology 19 (2), 38-41

Nanoindentation Study on Tourmaline

MO Adeoye, OO Adewoye

Journal of Minerals and Materials Characterization and Engineering 5 (01), 63

1. Okanigbe D.A., Popoola, A.P.I. and Adeleke A.A. (2018): Thermal Analysis and Kinetics of the Oxidative Roasting Proess of a Copper Smelter Dust, The International Journal of Advanced Manufacturing Tehnology, Springer, 94(5-8), 2393-2400
2. Phahla D., Adeleke A.A., Popoola A.P.I, ,Omidiji B.V. (2018): Optimization of the hydrolysis cake filtration process in Platinum extraction, Leonardo Journal of Sciences, Issue 32, January- June, 2018, p.93-105
3. Okanigbe D.A., Popoola, A.P.I. and Adeleke A.A. (2017): Characterization of Copper Smelter Dust for Copper Recovery, Procedia Manufacturing, 7, 121-126 5
4. Otunniyi, I.O., M. Oabile, Adeleke, A.A., Mendonidis P. (2016): Copper activation option for a pentlandite–pyrrhotite–chalcopyrite ore flotation with nickel interest, International Journal of Industrial Chemistry, DOI 10.1007/s40090-016-0087-7. Springer Online
5. Shai M. E., Adeleke, A. A., Popoola, A. P. I. (2015): Effects of Re-Routing of Concentrate Streams in the Industrial Scale Froth Flotation of Lower Group 6 PGM Ore, Journal of Engineering Science and Technology (JESTEC). Vol. 11, No. 121660–1668,
6. Madilen N. M., Adeleke A. A. and Mendonidis P. (2015): Effects of Sodium Iso-butyl Xanthate Dosage on the Froth Flotation of Bead Milled Middle Group 1-3 PGM Ore Blend, Aceh International Journal of Science and Technology,4(1):59-63.
7. Kgaka M, Adeleke A. A., Popoola A. P. I., Olubambi P. A. (2015): An Evaluation of the Efficiency of Commodas Optical Sorting of Gold Waste Rock Dumps, Mineral Processing & Extractive Metallurgy Review, 36: 123– 128, 2015.
8. Mokegthwa M. F., Adeleke A. A., Mendonidis P., Adeoye M. O. (2015): An Evaluation of Sodium Ethyl Xanthate for the Froth Flotation Upgrading of a Carbonatitic Copper Ore, Journal of Physical Science, Vol. 27(2), 13–21, 2016,
9. Mankge T. M. C., Adeleke A. A. and Mendonidis P. (2015). Optimization of Chromite Recovery from Cyclone-Spiral Circuit Concentration of a UG2 Ore, Journal of Engineering Research. Volume 20, No. 1,
10. Langa, N. T. N., Adeleke, A. A., Mendonidis, P., Thubakgale, C. K. (2014): Evaluation of Sodium Isobutyl Xanthate as a Collector in the Froth Flotation of a Carbonatitic Copper Ore, International Journal of Industrial Chemistry, DOI10.1007/S 40090 014-0025-5. Springer Online. USA.
11. Sibiya, B., Adeleke, A. A., Popoola, A. P. I, Olubambi, P. A. (2014): An Evaluation of the Calibration Process of a Neutron-gamma Ray Online Coal Analyzer, International Journal of Coal Preparation and Utilization, 34(1), 10-18.
12. Adeleke, A. A., Nemakhavhani, T. W., Popoola, A. P. I (2014): Evaluation of the Cyanidation Leaching of Gold in a Waste Rock Ore, IranianJournalof Chemistry and Chemical Engineering,33(2), 87- 91. Iran
13. Adeleke, A. A., Olawale, J. O., Oluwasegun, K. M., Shittu, M. D., Azeez, A. D., Falana, O. (2014): Multistage Dilute Acid Leaching of a Medium Grade Iron Ore, Journal of Mining and Metallurgy, 50A(1), 27-36.
14. Adeleke A. A., Popoola, A. P. I., Mekgwe T. (2013): The Improvement of the Efficiency of An Aluminosilicate Crushing Circuit, Journal of Mining and Metallurgy, 49 A (1) (2013) 31 – 36. Serbia.
15. Adeleke, A. A., Modiba, S. S., Popoola, A. P. I. and Olubambi, P.A (2013). Upon the

Flotability of Platinum Group Metals from the Bushveld Chromite Ore. Russian Journal of Mineral Processing (ObogashchenieRud), 13(4):17-20. Russia

16. Adeleke, A. A., Ibitoye, S. A., Afonja, A. A. (2013): Multistage Caustic Leaching De-

sulphurization of a High Sulphur Coal, Petroleum & coal, 55(2), 113-118. Slovenia.

17. Ayeni, F. A., Ibitoye, S. A. and Adeleke, A. A. (2012): Development of a Wet Magnetic-gravity Processing Route to Recover Columbite from Jos Mines Field Tailings Dump, Nigeria, Journal of Mining & Metallurgy, 48 A (1) (2012) 63-72.
18. Ayeni, F.A., Madugu, I. A., Ibitoye, S. A., Adeleke, A.A., Sukop, P. and Abdulwahab, M. (2012): Secondary Recovery of Columbite from tailing Dump in Nigerian Jos Mines Field, Journal of Minerals and Materials Characterization and Engineering 11(6), 587-595. USA.
19. Olulana, O.A., Adeleke, A.A., Adahama, A.B. and Ibitoye, S.A. (2011): Effects of pre-heating on the micum strength of coke from a coal blend including 5% non-caking

Nigerian Okaba coal, Petroleum & coal, 53(1), 8-12. Slovenia.

20. Oluwasegun, K.M, Adedayo, A.V, Adeleke, A. A. and Oluwole, O. O.(2011): The role of forging during inertia friction welding of superalloy RR 1000, Journal of Engineering Research, 16(4), 29-41.Nigeria.
21. Adeleke, A.A., Olulana, O.A., Adahama, A.B., Makan R.S. and Ibitoye, S.A. (2009): A Prediction of micum strength of metallurgical coke using dilatometric parameters of parent coals, Petroleum & coal, 51(2), 75-79. Slovenia.
22. Ola, S. A., Adeleke, A.O., Usman, G.A., Odunaike, A.A., Kollere, A.M. and Ajiboye, P.O.(2009): Study on magnetic concentration of Itakpe sinter concentrate to a Midrex grade concentrate, Maejo International Journal of Science and Technology, 3(3), 400-407. Thailand.
23. Adeleke, A.O., Olulana, A.O., and Ibitoye, S.A. (2007): Study on the reliability of Coke

Research Establishment Micum 40 Formula to predict coke Micum 40 strength at the Ajaokuta Steel Plant, Nigeria, Journal of Minerals and Materials Characterization and Engineering, 6(2), 135-142. USA.

24. Adeleke, A.O., Makan, R.S. and Ibitoye, S.A. (2007): Studies on the Gieseler plastometry parameters of the American Pittson coal for metallurgical cokemaking at the Ajaokuta Steel plant, Nigeria, Pacific Journal of Science and Technology (PJST), 8(2), 208-211. USA.

Adeleke, A.O., Makan, R.S., and Ibitoye, S.A. (2006): Characterization of Ajaokuta coke for blast furnace ironmaking, Journal of Minerals and Materials Characterization and Engineering 5(2), 155-165. USA.

Corrosion Resistance Through the Application of Anti-Corrosion Coatings

API Popoola, OE Olorunniwo, OO Ige

InTech -Open Acess Publisher.

Comparison of Bentonite and Cassava Starch on the Moulding Properties of Silica Sand

PO Atanda, K Alonge, OE Olorunniwo, OO Oluwole

International Journal of Materials and Chemistry 2 (4), 132-136

Mechanical Properties of a Polyester Fibre Glass Composite

Aramide F.O, Atanda P.O., Olorunniwo O.E

International Journal of Composite Materials 2 (6), 147-151

Monitoring,Control and Prevention Practices of Biomaterials Corrosion – An Overview

OO Ige, LE Umoru, MO Adeoye, AR Adetunji, OE Olorunniwo, …

Trends in Biomaterials and Artificial Organs 23 (2), 93 – 104

Effects of different amino-acid derivatives on the inhibition of NST-44 mild steel corrosion in lime fluid

M Alagbe, LE Umoru, AA Afonja, OE Olorunniwo

Journal of Applied Sciences 6 (5), 1142-1147

Mechanical and microstructural characterization of ductile iron produced from fuel-fired rotary furnace

AA Abioye, OP Abioye, OO Ajayi, SA Afolalu, MA Fajobi, PO Atanda

International Journal of Mechanical Engineering and Technology (IJMET) 9 (1 …

Structural and Properties of Zn-Al2O3-SiC nano-composite coating by direct electrolytic Process

OSI Fayomi, API Popoola, OE Olorunniwo

The International Journal of Advanced Manufacturing Technology 87 (1–4), 389–398

Investigation of the effect of Different amino-acid derivatives on the inhibition of NST-44 mild steel corrosion in cassava fluid

M Alagbe, LE Umoru, AA Afonja, OE Olorunniwo

Anti-corrosion Methods and Materials. 56 (1), 43-50

Effect of Magnisium and Calcium as Spheroidizers on the Graphite Morphology in Ductile Cast Iron

OO Oluwole, OE Olorunniwo, OO Ogundare, PO Atanda, OO Oridota

The Journal of Minerals and Materials Characterization and Engineering 6 (1 …

Effect of Magnesium and Calcium as Spheroidizers on the Graphite Morphology in Ductile Cast Iron

OO Oluwole, OE Olorunniwo, OO Ogundare, PO Atanda, OO Oridota

Journal of Minerals and Materials Characterization and Engineering 6 (1), 25-37

The Thermal Analysis of Fuel Fired Crucible Furnace Using Autodesk Inventor Simulation Software

AA Abioye, PO Atanda, OF Kolawole, OE Olorunniwo, AR Adetunji, …

Advances in Research 5 (3), 1-7

Developments in Corrosion Protection, ed

A Popoola, O Olorunniwo, O Ige

M. Aliofkhazraei (IntechOpen: Rijeka, 2014), 241

Effect of Iso-Thermal Treatment on the Corrosion Behaviour of Low Carbon Steel( Nigerian C2R grade) in a Buffered Solution containing Chloride and Carbonate Ions

PO Atanda, OE Olorunniwo, OD Alabi, OO Oluwole

International Journal of Materials and Chemistry 2 (2), 65-71

The Thermal Analysis of Fuel Fired Crucible Furnace Using Autodesk Inventor Simulation Software

AA Abioye, PO Atanda, OF Kolawole, OE Olorunniwo, AR Adetunji, …

Production and characterization of clay bonded carbon refractory from Ifon clay and spent graphite electrode

SR Oke, HK Talabi, OE Olorunniwo, PO Atanda, FO Aramide

International Journal of Metallurgical Engineering 4 (2), 33-39

Modeling heat flow across the fuel-fired crucible furnace using ADINA

PO Atanda, OE Olorunniwo, AA Abioye, OO Oluwole

International Journal of Scientific & Engineering Research 5 (7), 608-611

Effect of Process Parameters on the Microstructure and Mechanical Properties of Iso -Thermally Treated Ductile Iron

Atanda P.O., Olorunniwo O.E., Imasogie B.I.

Material Performance and Characterization 3 (1), 255-262

Corrosion Characteristics of Ascast Ductile Iron in Lime Juice

FO Aramide, EO Olorunniwo, PO Atanda, JO Borode

Journal of Minerals and Materials Characterization and Engineering 9 (10), 867

Effects of Variation of Some Process Variables on Recrystallization Rate of Aluminium Alloy (6063)

OE Olorunniwo, PO Atanda, KJ Akinluwade

Journal of Minerals and Materials Characterization and Engineering 8 (1), 1-14

Performance Evaluation Effect of Nb2O5 Particulate on the Microstructural, Wear and Anti-corrosion Resistance of Zn–Nb2O5 Coatings on Mild Steel for Marine …

T Oluyori, OE Olorunniwo, OSI Fayomi, PO Atanda

Journal of Bio-and Tribo-Corrosion 3 (4), 51

Eco-friendly Inhibitors for Erosion-corrosion Mitigation of API-X65 Steel in CO2 En‐vironment

OO Ige, MD Shittu, KM Oluwasegun, OE Olorunniwo, LE Umoru

Ife Journal of Technology 21 (2), 43-48

Sodium chromate and diethylene amine as corrosion inhibitors for mild steel in cassava fluid

OE Olorunniwo, LE Umoru, OR Bamigboye

J Appl sci 6 (4), 878-882

Internal Corrosion Monitoring and Control In Sour Gas Environment

OE Olorunniwo, BI Imasogie

Journal of Materials Performance 44 (8), 36-39

Thermal and mechanical effect during rapid heating of astroloy for improving structural integrity

KM Oluwasegun, OE Olorunniwo, PO Atanda, VS Aigbodion

Journal of Alloys and Compounds 666, 482-492

Effect of Ca-Mg and MgFeSi Graphite Nodularizers on the Nodular Graphite Characteristics of Ductile Cast Irons

PO Atanda, OE Olorunniwo, BI Imasogie

Materials Performance and Characterization 2 (1), 391-399

Failure analysis of a ruptured trunkline

GM Oyatogun, MO Adeoye, OE Olorunniwo, LE Umoru

Journal of failure analysis and prevention 11 (5), 522-529

Performance of Nickel-Coated Manganese Steel in High-Chloride Low-Sulphate Seawater Environments

OE Olorunniwo, PO Atanda, KJ Akinluwade, AR Adetunji, …

Journal of Minerals and Materials Characterization and Engineering 9 (10), 879

A Study of Processing Parameters on the Carburization of C2R Steels

PO Atanda, OE Olorunnuwo, LE Umoru, AD Adeyeye

Scientific Research Publishing

Strengthening of Alloy steel by high temperature thermomechanical treatment

JA Omotyinbo, OE Olorunniwo, O Ogundare, OO Oluwole

INSInet Publication.

Texture and Structure of Cold Rolled and Temper Annealed Sheet of Aluminium 1200

Oluwole,O.O, JA Ajayi, OE Olorunniwo, AA Sofoluwe

NSE Technical Transactions 37 (2), 53-69

Material Selection for the Fuel Fired Crucible Furnace Using GRANTA

PO Atanda, AA Abioye, OE Olorunniwo, OO Oluwole

International Journal of Scientific and Engineering Research 5 (7), 615-626

Optimizing the Properties of Polyester Based Polyurethane Foam

FO Aramide, PO Atanda, OE Olorunniwo

Open Journal of Polymer Chemistry 3, 86-91

Evaluation of Pipeline Corrosion in Sour-gas Environment

OE olorunniwo, BI Imasogie, AA Afonja

Anti- Corrosion Methods and Materials 54 (6), 346 -353

Earing characteristics of cold-rolled and temper annealed aluminium 1200

DA Aderibigbe, OO Oluwole, OE Olorunniwo, PO Atanda, O Ogundare

Asian Network for Scientific Information

Effect of degree of deformation on the mechanical properties of high temperature thermomechanically treated steel

JA Omotoyinbo, OE Olorunniwo, O Ogundare, OO Oluwole

Asian Network for Scientific Information

ECOFRIENDLY INHIBITORS FOR EROSION-CORROSION MITIGATION OF APIX65STEELIN CO2 ENVIRONMENT

OO Ige, MD Shittu, KM Oluwasegun, OE Olorunniwo, LE Umoru

Jain, PC, 762-773

Production and Characterization of Clay Bonded Carbon Refractory from Ifon Clay and Spent Graphite Electrode

OS Ranti, TH Kayode, OE Olorunniwo, PO Atanda, FO Aramide

International Journal of Metallurgical Engineering 4 (2), 33 – 39

Corrosion Investigation In Reinforced Concrete Using a Potentiostat

OE Olorunniwo, API Popoola, B Aremo, OO Ige

African Corrosion Journal 1 (1), 42-45

Appraisal of Solution Heat Treatment on Elimination of Hafnium Rich Eutectic and Prior Particle Boundary Precipitate in a Superalloy Powder

KM Oluwasegun, JO Olawale, MO Adeoye, OE Olorunniwo, OO Ige, …

Materials Performance and Characterization 3 (1), 342 -354

Standard test method for half-cell potentials of uncoated reinforcing steel in concrete.

JO Okeniyi, CA Loto, API Popoola, OO Ajayi, RO Fagbenle, J Katende, …

Journal of Applied Sciences 15 (8), 1142-1147

An Overview of Electrochemical Technique for Decolouring Aqueous Solutions with Optimization and Economics

IA Oke, OE Olorunniwo, Taiwo, E.A, GM Oyatogun, PO Atanda, …

NOVA 15, 387-410

Technical Evaluation of Ondo Bitumen for Direct Asphalt Concrete Mix Design

AA Adeleke, AS Adeosun, AO Disu, OE Olorunniwo

Petroleum and Coal 54 (2), 184-190

CO-INHIBITION CHARACTERISTICS OF SODIUM TUNGSTATE WITH SODIUM NITRATE ON LOW CARBON STEEL IN 0.085 M HCL.

OO Ogundare, LE Umoru, OE Olorunniwo, OO Ige

Emirate Journal for Engineering Research 17 (2), 1-6

The Role Constitutional Liquation of Primary Strengthening Phases in Improving the High Temperature Performance of Inertial Friction Welded PMRR1000 Superalloy

KM Oluwasegun, OE Olorunniwo, BI Imasogie

Nigerian Journal of Materials Science and Engineering 2 (1), 1-8

Adaptation of Opa Silica Sand as Moulding sand for Foundries

PO Atanda, OE Olorunniwo, KJ Akinluwade, FO Aramide, BI Imasogie

Nigerian Journal of Materials Science and Engineering 2 (1), 24-32

Characterisation of Liquation Products In A Nickel Base Superalloy

O K.M., MO Adeoye, PO Atanda, OE Olorunniwo, B Aremo

Ife Journal of Technology 20 (2), 99 – 105

The Effects of Fiber Orientation on Mechanical Properties of Polymer Matrix Composites

MO Adeoye, OE Olorunniwo, PO Atanda, LE Umoru

Ife Journal of Technology 19 (2), 8-10

The contribution of eutectic liquid film to the TMAZ microfissuring in intertia friction welded PM RR1000 superalloy

KM Oluwasegun, OE Olorunniwo, OO Oluwole

The Nigerian Institution of Mechanical Engineers

Comparative Analysis of Pack Carburized Low Carbon Steel Using Charcoal and Palm kernel Shells

PO Atanda, MO Adeoye, OE Olorunniwo, KM Oluwasegun

International Journal of Physical Science 2 (7), 32- 38

Galvanic corrosion of zinc in turbulently moving saline water containing drag reducing polymers.

A A. Khadom, K W. Hameed, MJ Ahmed, AA Khadom, AH Kadhum, …

International Journal of Chemical Technology 4 (1), 294-304

Properties and structures of iron doped carbon resin electrodes for wastewater treatment

IA Oke, LE Umoru, OE Olorunniwo, FI Alo, MA Asani

Solid waste management and environmental remediation

Design and Construction of An Integrated Salt Bath Isothermal Heat Treatment Furnace Unit for the Production of Austempered Ductile Iron

PO Atanda, OE Olorunniwo, BI Imasogie, R Adetunji, A, LE Umoru, …

Nigerian Materials Congress 2007 (2), 201-208

Simulation of riser size from musty zone of unrisered Alsi7mg alloy

OO Oluwole, OE Olorunniwo, PO Atanda

INSInet Publication

Simulation studies of nodular iron’s bull’s eye effect on stress concentration under plane stress conditions

OO Oluwole, OE Olorunniwo

Scientific research

GBB Pitta, AA Castro

Jornal Vascular Brasileiro 5 (4), 243-244

Investigation of the inhibitive influence of Theobroma cacao and Cola acuminata leaves extracts on the corrosion of a mild steel in sea water.

OE Olorunniwo, DS Azambuja, EAA Martini, L Muller, F Bentiss, …

Journal of Applied Sciences 6 (4), 570-576

Grain boundaries in engineering materials.

JA Omotoyinbo, OE Olorunniwo, O Ogundare, OO Oluwole, RD Askeland, …

Journal of Applied Sciences 6 (8), pp: 174-185-pp: 174-185

1.         Akinluwade Kunle, Adetunji Adelana, Adewoye Olusegun (2016). “Pack Cyaniding: Cassava Leaves”. In Encyclopedia of Iron, Steel, and Their Alloys. Taylor and Francis: New York, Published online: 30 Mar 2016; 2489–2500. USA.

2.         W. O. Siyanbola, A. Y. Fasasi, I. I. Funtua, O. Afolabi, A. A. Adesiyan,   

A.R. Adetunji; (2004) “Elemental Composition of Rutile From South-Western

Nigeria Using X-ray Techniques”; Nuclear Instruments and Methods in Physics

Research B 215, 240-245. United Kingdom.

3.         M. Adetola Badejo, A. R. Adetunji and A. Dotun Awoyomi; (2004); “Soil

Dwelling Mites (Acarina) in the Dumpsites of a Metal Finishing Industry in

Nigeria”; Science Focus, vol 7, pp 58-63. Nigeria.

4.         Adetunji, A. R., Siyanbola, W. O., Funtua, I. I., Olusunle, S. O. O, Afonja, A. A. and Adewoye, O. O.; (2005) “Assesment of Beneficiation Routes of Tantalum

Ores From Key Locations in Nigeria”, Journal of Minerals & Materials

Characterization and Engineering, vol 4, No 2, 85-93. USA.

5.         A. R Adetunji, A. O. Ajayi and G. A. Aderounmu (2007); “An Object Oriented Programming Approach to Simulation of a Quantitative Output of Tantalum

Compounds From Tantalum/Niobium Extraction Circuit”; Ife Journal of

Technology, vol 16(2), 49-56. Nigeria.

6.         A. R. Adetunji, B. E. Attah Daniel, D. A. Pelemo, O. A. Olasupo, M. O. Adeoye, L. E. Umoru, C. E. Adeeyinwo and O. O. Adewoye (2008); “Metallographic

Studies of Pack Cyanided Mild Steel Using Cassava Leaves” Materials and

Manufacturing Processes, 23:4, 385-390. USA.

7.         Adetunji, A., Adetunji, A. R., Ocan, O. O., Siyanbola, W. O., Adewoye, O. O. and Afonja, A. A. (2008); “Microscale Studies of Niobium-Tantalum Minerals

From Komu, Southwestern Nigeria”; Journal of Minerals and Materials

Characterization, vol 7, No 4, 367-378. USA.

8.         Olusunle, S. O. O., Siyanbola, W. O., Adetunji, A. R., Adeoye, M. O. and Adewoye, O. O. (2009); “Effect of Buffer Solutions on the Flow and Fracture in Calcite”; Journal of Minerals and Materials Characterization, vol 8, No 3, 189-202. U. S. A.

9.         Imasogie B. I; Afonja A. A; Adewoye O. O; Babatope B. and Adetunji A. R. (2009), “Production Technology and Applicationsof Austempered Ductile Iron (ADI): An Overview”, Ife Journal of Technology, Vol 1, No 1, 9-24. Nigeria.

10.       Ige, O. O., Umoru, L. E., Adeoye, M. O., Adetunji, A. R., Olorunniwo, O. E. and Komolafe, I. I. (2009); “Monitoring, Control and Prevention Practices in Corrsion of Biomaterials – An Overview”, Trends in Biomaterials and Artificial Organs, vol. 23, No 2, pp93-104. India.

11.       O. D. Ogundare, A. R. Adetunji, B. Babatope and S. O. O. Olusunle (2011); “Corrosion Behaviour of Ductile Iron in Hydrochloric Acid, Sodium Hydroxide, Seawater, Air and Cassava Slurry”, Journal of Metallugical and Materials Engineering, vol 6, N0 2, pp1-9. Nigeria.

12.       Akinluwade, K. J., Adetunji, A. R., Adeoye, M. O., Umoru, L. E., Kalu, P. N., Taiwo, A. T. and Adewoye, O. O. (2012). Development of an Environmentally Friendly In-Situ Pack Cyaniding Technique. Journal of Minerals & Materials Characterization & Engineering. Vol. 11 no. 1, pp. 21-30.U. S. A.

13.       Taiwo, A. T., Adetunji, A. R., Adewoye, O. O., Olusunle, S. O., Akinluwade, K. J., Atanda, P. O., Umoru, L. E., Alasoluyi, J. O. (2012)  Effect of Tin Addition on the Mechanical Properties of As-Cast and Annealed Ductile Cast Iron. Nigerian Journal of Materials Science and Engineering Vol. 3, no. 1, pp 30-35. Nigeria

14.       J. O. Oji, N. Idusuyi, T. O. Aliu, M. O. Petinrin, O. A. Odejobi and A. R. Adetunji (2012), “Utilization of Solar Energy for Power Generation in Nigeria”, International Journal of Energy Engineering  2(2): 54-59. Australia.

15.       M. A. Bolarinwa, A. R. Adetunji and O. O. Adewoye (2012), “SEM Studies of Adhesion Property of Red Oxide Primer on Selected Metal Substrates” Advanced Materials Research, vol 367, pp327-333. Switzerland.

16.       Akinluwade, K. J; Adetunji, A. R.; Adeoye, M. O.; Umoru, L. E.; Taiwo A. T.; Kalu, P. N.; Rominiyi, A.; Isadare, D. A.; Soboyejo, W. W., Adewoye, O. O. (2013). Light and Electron Microscopy Study of the Visible Diffusion Zone of Mild Steel Pack Cyanided in Processed Cassava Leaves. International Journal of Materials Science and Engineering B, Vol. 3, No. 9, pp 567—570. U. S. A.

17.       Ogundare O.D., Momoh I.M., Akinribide O.J., Daniyan, A.A.,  Adetunji, A.R. and Olusunle, S.O.O. (2013), “Effect of Strain Rates on Mild Steel under Tensile Loading”,  International Journal of Science and Technology Volume 2 No. 8. U. K.

18.       John O. Oji, Pamtoks H. Sunday, Omolayo M. Petinrin, and Adelana R. Adetunji (2013),” Taguchi Optimization of Process Parameters on the Hardness and Impact Energy of Aluminium Alloy Sand Castings”, Leonardo Journal of Sciences, Issue 23, 1-12. Romania.

19.       Isadare, D. A., Adeoye, M. O., Adetunji, A. R., Oluwasegun, K. M. and Akinluwade, K. J. (2014). Optimization of Mechanical Properties of Age-Hardened 6063 Aluminium Alloy Via Diffusion Annealing. British Journal of Applied Science & Technology 4(23): 3360-3369. UK.

20        Oduola, O. M., Oke, P. K., Akinluwade, K. J. and Adetunji A. R. (2014) Development of Computer Software for Evaluating Performance Index of Fairly used Vehicle Engines. Material Science and Engineering A 4(7) pp 249-254. US.

21        Adetunji, A.  R., Isadare, D.  A., Akinluwade, K.  J., Adewoye, O.  O. (2015). Waste-To-Wealth Applications of Cassava– A Review Study of Industrial and Agricultural Applications. Advances in Research. Vol. 4, no. 4, pp.  212-229. USA

22        Isadare, D. A., Adeoye, M. O., Adetunji, A. R., Oluwasegun, K. M., Rominiyi, A. L. and Akinluwade, K. J. (2015). Effect of As-Cast Cooling on the  Microstructure and Mechanical Properties of Age-Hardened 7000 Series Aluminium Alloy. International Journal of Materials Engineering. Vol. 5, no. 1, pp. 5-9. USA.

23        Olabode, O. O., Ogundare, M. O., Adesina, O. S., Isadare, D. A., Akinluwade, K. J., Taiwo, A. T., Odejobi, O. A and Adetunji, A. R. (2015).  A Microcontroller-based Design for Energy Efficient Nickel-chrome Plating Process. American Chemical Science Journal. Vol. 7, no. 2, pp. 91-101. India.

24        Adetunji, A. R., Abioye, A. A., Isadare, D. A., and Akinluwade, K. J. (2015). Material Selection for Crusher Jaw in a Jaw Crusher Equipment. International Journal of Materials Engineering. Vol. 5, no. 2, pp. 17-22. USA.

25        E. K. Arthur, E. Ampawa, M. G. Zebaze Kana, K. J. Akinluwade, A. R. Adetunji, O. O. Adewoye, W. O. Soboyejo (2015): Indentation size effects in  pack carbo-nitrided AISI 8620 steels. Materials Science & Engineering A. Vol. 644, no. 2015, 347–357. USA.

26        Emmanuel Kwesi Arthur, Edward Ampaw, M. G. Zebaze Kana, A. R. Adetunji, S. O. O. Olusunle, O. O. Adewoye & W. O. Soboyejo (2015),  “Nano- and Macro-wear of Bio-carbo-nitrided AISI 8620 Steel Surfaces”, Metallurgical and Materials Transactions A Vol 46A, Issue 12, pp 5810–5829. Switzerland.

27        E. K. Arthur, E. Ampaw, K. J. Akinluwade, A. R. Adetunji, O. O. Adewoye, W.O. Soboyejo (2016). Carbon and Nitrogen Concentration Profiles of Cassava-Pack Carbonitrided Steel: Model and Experiment. Advanced  Materials Research Vol. 1132, pp 313-329. Switzerland.

28        E. K. Arthur,  E. Ampaw, M. G. Zebaze Kana, A. R. Adetunji, O. O. Adewoye and W. O. Soboyejo (2016), “Surface Hardening of AISI 8620 Steel with Cassava (Manihot spp.) Waste”, Waste and Biomass Valorization, Vol 7, No 3; pp 603-614. Netherlands.

29        O. D. Ogundare, M. O. Adeoye and A. R. Adetunji (2016), “Laboratory Preparation of the Precursor for Synthesis of Gold Nanoparticles”, American Chemical Science Journal 14(4): 1-8. India.

30.       Ogundare, O., Adeoye, M. O., Adetunji, A. R. and Adewoye, O. O. (2011); “Gold Nanoparticle: A Review”, In: Proceedings of the Materials Science and Technology Society of Nigeria, Akure, Nigeria, Nov. 21-249, 2011, pp459-464. Nigeria

i.                 Ibitoye, S.A., Olawale, J.O., and Shittu, M.D. (2009); Mechanical Properties of Quench- Hardened, Martempered and Tempered ASTM A 128 Grade B-4 Steel, Journal of Science and Technology (JUST), 29(2): 107 – 117. Ghana

ii.                Ibitoye, S.A., Shittu, M.D., and Olawale, J.O. (2010); Grain Size and Porosity of Cast Hypoeutectic Aluminium-Silicon Alloys in Hexachloroethane Coated Mould, Russian Journal of Non-Ferrous Metals, 51(1): 62 – 68. DOI: 10.3103/S1067821210010128. Russia

iii.               Olawale, J.O.,Ibitoye, S.A., and Shittu, M.D. (2011);Suitability Assessment of SomeNigerian Natural Moulding Sand Deposits for Foundry Use, Ife Journal ofTechnology, 20(2): 46-50. Nigeria

iv.               Olawale, J.O., Ibitoye, S.A., Shittu, M.D., and Popoola, A.P.I. (2011); A Study of Premature Failure of Crusher Jaws, Journal of Failure Analysis and Prevention, 11(6): 705 – 709. DOI: 10.1007/s11668-011-9511-7. USA

v.                Shittu, M.D., Ibitoye, S.A., Olawale, J.O., and Popoola, A.P.I. (2012); Superheat Influence on Mechanical Properties of a Cast Hypoeutectic Aluminium-Silicon Alloy,International Journal of Cast Metal Research,25(3): 170-175. DOI: 10.1179/1743133612Y.0000000005. USA

vi.               Olawale, J.O., Ibitoye, S.A., Oluwasegun, K.M., Shittu, M.D., and Ofoezie, R. (2012); Correlation between Process Variables in Shielded Metal-Arc Welding (SMAW) Process and Post Weld Heat Treatment (PWHT) on Some Mechanical Properties of Low Carbon Steel Welds, Journal of Minerals and Materials Characterization and Engineering, 11(9): 891-895. DOI: 10.4236/jmmce.2012.119085. USA

vii.              Shittu, M.D., Ibitoye, S.A., and Olawale, J.O. (2012); Mechanical Properties of Cast Hypoeutectic Al-Si Alloy in Hexachloroethane-Coated Mould, Journal of Engineering Science & Technology (JESTEC). 7(4), 529-539. Malaysia

viii.             Oluwasegun, K.M., Imasogie, B.I., Olawale, J.O. Oyatogun, G.M., and Shittu, M.D. (2012); TEM Characterization of the Order-Disorder Transformation of Precipitates, The Nigerian Journal of Materials Science and Engineering (NJMSE),3(1): 1- 7. Nigeria

ix                Isadare, D.A., Aremo, B., Adeoye, M.O., Olawale, J.O., and Shittu, M.D. (2013); Effect of Heat Treatment on some Mechanical Properties of 7075Aluminium Alloy, Materials Research, 16(1): 190-194. DOI: 10.1590/S1516-14392012005000167. Brazil

x.                Olawale, J.O., Odusote, J.K., Rabiu, A.B., and Ochapa, E.O. (2013); Evaluation of Corrosion Behaviour of Grey Cast Iron and Low Alloy Steel in Cocoa Liquor and Well Water, Journal of Minerals and Materials Characterization and Engineering, 1(2): 44-48. DOI: 10.4236/jmmce.2013.12009. USA

xi.               Ibitoye, S.A., Adeleke, A. A., Aramide F.O., Olawale, J.O., Tiamiyu, A.O., Oluwasegun, K. M., Abdul-Kareem, T.O., and Shittu, M.D. (2013); Some Mechanical Properties of SiC-Treated Recycled HDPE, International Journal of Materials and Chemistry, 3(3): 45-50. DOI: 10.5923/j.ijmc.20130303.01. USA

xii.              Olanrewaju, O.A., Adeoye, M. O., Olawale, J.O., and Shittu, M.D. (2013); Failure Analysis of a Shaft-Coupling Bracket, Materials Performance and Characterization, 2(1): 308-318. DOI: 10.1520/MPC20120029. ISSN 2165-3992. USA

xiii.             Olawale, J.O., Ibitoye, S.A., and Shittu, M.D., (2013), WorkhardeningBehaviour and Microstructural Analysis of Failed Austenitic Manganese Steel Crusher Jaws, Materials Research, 16(6): 1274-1281. DOI: 10.1590/S1516-1439013005000144. Brazil

xiv.             Shittu, M.D., Olawale, J.O., Adeoye, M.O., Oluwasegun, K.M., Adebayo, K.M., and Ige, O.O. (2014); Investigation of Corrosion Resistance of Polystyrene as an Inhibitor in Hydrochloric and Tetra-oxo Sulphate VI Acids, International Journal of Materials and Chemistry, 4(1): 9-13. DOI: 10.5923/j.ijmc.20140401.02. USA

xv.              Oluwasegun, K.M., Olawale, J.O., Ige O.O., Shittu, M.D., Adeleke, A.A. and Malomo, B.O. (2014); Microstructural Characterization of Thermomechanical and Heat Affected Zones of an Inertia Friction Welded Astoloy, Journal of Engineering Materials and Performance, 23(8): 2834-2846. DOI: 10.1007/s11665-014-1067-8. ISSN 1059-9495. USA

xvi.             Oluwasegun, K.M., Olawale, J.O., Oyatogun, G.M., Shittu, M.D., Ige, O.O. and Malomo, B.O. (2014); In-Situ Micro-Mechanical Testing of a PM Nickel Base Superalloy Weld, Metallurgical and Materials Transaction A, 45(11): 5127-5137. DOI: 10.1007/s11661-014-2462-3.ISSN 1073-5623.USA

xvii.            Ibitoye, S.A., Olawale, J.O., and Shittu, M.D. (2014); Influence of Cement-Silica Ratio on the Moulding Properties of Portland Cement Bonded Sand,Journal of Physical Sciences, 25(1): 113-122. Malaysia

xviii.           Oluwasegun, K.M., Olawale, J.O., Adeoye M. O., Olorunniwo O.E., Ige O. O., and       Atanda P.O (2014); Appraisal of Solution Heat Treatment on Elimination of Hafnium Rich γ- γ’ Eutectic and Prior Particle Boundary Precipitate in a Superalloy Powder, Materials Performance and Characterization, 3(1): 342-354. DOI: 1520/MPC20140034.USA

xix.             Olawale, J.O., Oluwasegun K.M., , Ezemenaka D.I., and Adisa  S.B. (2014); Production of Austempered Gray Iron (AGI) Using Forced Air Cooling, Materials Performance and Characterization, 3(1): 355-370. DOI: 1520/MPC20140024. USA

xx.              Adeleke, A.A., Olawale, J.O., Oluwasegun, K.M., Shittu, M.D., Azeez, A.D., and Falana, O. (2014); Multistage Dilute Acid Leaching of a Medium Grade Iron Ore to Super-Concentrate, Journal of Mining and Metallurgy, Section A: Mining, 50A(1): 27-37.Yugoslavia

xxi.             Ige, O.O., Babarinde, O. D., Aremo, B., Shittu, M. D., Olawale, O. J., and Olorunniwo, O. E., (2015); ChrysophyllumAlbidium Extracts as Corrosion Inhibition for Aluminium in 0.5 M H2SO4 Solution, African Corrosion Journal, 1(2): 25-30. Southern Africa

xxii.            Oluwasegun, K.M., Olawale, J.O., Adio, S.A., Isadare, D.A., and Daniyan, A.A. (2016);OntheRole ofModifiedPost WeldHeat TreatmentinEliminating Incipient MeltingofNon-EquilibriumProduct Resulting DuringSolid-StateWeldingof Astroloy,Metallurgical and Materials Transaction B, 47B(3): 2040-2047. DOI 10.1007/s11663-016-0667-0. ISSN 1073-5615.USA

xxiii.           Olawale, J.O., Ibitoye S.A., and Oluwasegun K.M. (2016); ProcessingTechniques and Applications ofDuctile Iron:A Review, International Journal of Scientific and Engineering Research, 7(9): 397- 423. ISSN 2229-5518. 

xxiv.           Ige, O.O., Olawale, J.O., Oluwasegun, K.M., Aribo, S., Oladele B.A., and Olubambi, P.A. (2016); Corrosion Behaviour of Austempered Ductile Iron Produced by Forced Air Quenching Method in a Simulated Mine Water, Procedia Manufacturing, 7: 579-583.

xxv.            Olawale, J.O., and Oluwasegun K.M.(2016); AustemperedDuctile Iron (ADI):A Review, Materials Performance and Characterization, 5(1): 289-311. https://dx.doi.org/10.1520/MPC20160053. ISSN 2165-3992.USA.

xxvi.           Olawale, J.O., Ibitoye S.A., Oluwasegun K.M. Shittu M.D. and Popoola A.P.I. (2017); Forced-Air Cooling Quenching: A Novel Technique for Austempered Ductile Iron Production, International Journal of Metalcasting, 11(3): 568-580. DOI 10.1007/s40962-016-0114-7. ISSN 1939-5981. USA

xxvii.          Olawale, J.O.andIbitoyeS.A.(2017); Influence of Casting Section Thickness on Fatigue Strength of Austempered Ductile Iron, Journal of Engineering Materials and Performance, 26(10): 4997-5008.DOI 10.1007/s11665-017-2964-4. ISSN 1059-9495. USA

xxviii.         Oluwasegun, K.M., Olawale, J.O., Shittu, M.D., Ige O.O., Atanda, P.O.,Ajide, O.O. and Osoba, L.O. (2017);On the Role of Boride in the Structural Integrity of a Turbine Disc Superalloy’s Solid-State Weld, American Journal of Materials Engineering and Technology, 5(1): 14-23. DOI:10.12691/materials-5-1-3. USA

xxix.              Olawale, J.O., Ibitoye S.A., and Oluwasegun K.M. (2018); Effects of Section Thickness on the Microstrucure and Mechanical Properties of Austempered Ductile Iron, Journal of Materials Sciences and Application, 4(2): 17-30. ISSN 2381-1005. USA

     xxx.            Olawale, J.O., and Ibitoye, S.A. (2018); Failure Analysis of a Crusher Jaw(Chapter 10).In Abdel Salam HamdyMakhlouf and Mahmood Aliofkhazraei (Eds.), Hand Book of Materials Failure Analysis with Case Studies from the Construction Industries (pp187 –207). Butterworth-Heinemann an imprint of Elsevier Limited. http://dx.doi.org/10.1016B978-0-08-101928-3.00010-0.ISBN: 978-0-08-101928-3. USA

  1. Ibitoye, S. A., Adeleke, A. A., Aramide F.O., Olawale, J.O., Tiamiyu, A. O., Oluwasegun,    

            K. M., Abdul-Kareem, T. O. and Shittu, M.D. (2013); Some Mechanical Properties of   

            SiC-Treated Recycled HDPE, International Journal of Materials and Chemistry, 3(3):     

           45 – 50. DOI: 10.5923/j.ijmc.20130303.01. USA.

    2           Olanrewaju, O.A., Adeoye, M.O., Olawale, J.O., and Shittu, M.D. (2013); Failure

                 Analysis of a Shaft-Coupling Bracket, Materials Performance and Characterization, 2(1):

                 308 -318. DOI: 10.1520/MPC20120029.ISSN 2165-3992. USA.

         3.          Olawale, J.O., Ibitoye, S.A., and Shittu, M.D. (2013); Workhardening Behaviour and

            Microstructural Analysis of Failed Austenitic Manganese Steel Crusher Jaws, Materials

           Research, 16(6): 1274-1281. DOI: 10.1590/S1516-14392013005000144. Brazil.

4.            Shittu, M.D., Olawale, J.O., Adeoye, M.O., Oluwasegun, K.M., Adebayo, K.M., and Ige,

     O.O. (2014); Investigation of Corrosion Resistance of Polystyrene as an Inhibitor in

     Hydrochloric and Tetra-oxo Sulphate VI Acids, International Journal of Materials and

    Chemistry, 4(1): 9 – 13. DOI: 10.5923/j.ijmc20140401.02. USA.

5.            Oluwasegun, K.M., Olawale, J.O., Ige O.O., Shittu, M.D., Adeleke, A.A. and Malomo,  

               B.O. (2014); Microstructural Characterization of Thermomechanical and Heat Affected   

             Zones of an Inertia Friction Welded Astoloy, Journal of Engineering Materials and  

               Performance, 23(8): 2834-2846. DOI: 10.1007/s11665-014-1067-8. ISSN 1059-9495.  

             USA.

     2015 Papers

1.           Oluwasegun, K.M., Olawale, J.O., Oyatogun, G.M., Shittu, M.D., Ige, O.O. and Malomo,   

             B.O. (2014); In-Situ Micro-Mechanical Testing of a PM Nickel Base Superalloy Weld,  

              Metallurgical and Materials Transaction A, 45(11): 5127-5137. DOI: 10.1007/s11661- 

             014- 2462-3. ISSN 1073-5623. USA.

2.           Ibitoye, S.A., Olawale, J.O., and Shittu, M.D. (2014); Influence of Cement-Silica Ratio on    

    the Moulding Properties of Portland Cement Bonded Sand, Journal of Physical Sciences,         

   25(1): 113-122. Malaysia.

3.           Adeleke, A.A., Olawale, J.O., Oluwasegun, K.M., Shittu, M.D., Azeez, A.D. and Falana,   

             O. (2014); Multistage Dilute Acid Leaching of a Medium Grade Iron Ore to Super- 

   Concentrate, Journal of Mining and Metallurgy, Section A: Mining, 50A(1): 27-37.  

   Yugoslavia.

List of Publications-Dr Shittu M.D

  1. Ibitoye, S. A., Adeleke, A. A., Aramide F.O., Olawale, J.O., Tiamiyu, A. O., Oluwasegun,    

            K. M., Abdul-Kareem, T. O. and Shittu, M.D. (2013); Some Mechanical Properties of   

            SiC-Treated Recycled HDPE, International Journal of Materials and Chemistry, 3(3):     

           45 – 50. DOI: 10.5923/j.ijmc.20130303.01. USA.

    2           Olanrewaju, O.A., Adeoye, M.O., Olawale, J.O., and Shittu, M.D. (2013); Failure

                 Analysis of a Shaft-Coupling Bracket, Materials Performance and Characterization, 2(1):

                 308 -318. DOI: 10.1520/MPC20120029.ISSN 2165-3992. USA.

         3.          Olawale, J.O., Ibitoye, S.A., and Shittu, M.D. (2013); Workhardening Behaviour and

            Microstructural Analysis of Failed Austenitic Manganese Steel Crusher Jaws, Materials

           Research, 16(6): 1274-1281. DOI: 10.1590/S1516-14392013005000144. Brazil.

4.            Shittu, M.D., Olawale, J.O., Adeoye, M.O., Oluwasegun, K.M., Adebayo, K.M., and Ige,

     O.O. (2014); Investigation of Corrosion Resistance of Polystyrene as an Inhibitor in

     Hydrochloric and Tetra-oxo Sulphate VI Acids, International Journal of Materials and

    Chemistry, 4(1): 9 – 13. DOI: 10.5923/j.ijmc20140401.02. USA.

5.            Oluwasegun, K.M., Olawale, J.O., Ige O.O., Shittu, M.D., Adeleke, A.A. and Malomo,  

               B.O. (2014); Microstructural Characterization of Thermomechanical and Heat Affected   

             Zones of an Inertia Friction Welded Astoloy, Journal of Engineering Materials and  

               Performance, 23(8): 2834-2846. DOI: 10.1007/s11665-014-1067-8. ISSN 1059-9495.  

             USA.

     2015 Papers

1.           Oluwasegun, K.M., Olawale, J.O., Oyatogun, G.M., Shittu, M.D., Ige, O.O. and Malomo,   

             B.O. (2014); In-Situ Micro-Mechanical Testing of a PM Nickel Base Superalloy Weld,  

              Metallurgical and Materials Transaction A, 45(11): 5127-5137. DOI: 10.1007/s11661- 

             014- 2462-3. ISSN 1073-5623. USA.

2.           Ibitoye, S.A., Olawale, J.O., and Shittu, M.D. (2014); Influence of Cement-Silica Ratio on    

    the Moulding Properties of Portland Cement Bonded Sand, Journal of Physical Sciences,         

   25(1): 113-122. Malaysia.

3.           Adeleke, A.A., Olawale, J.O., Oluwasegun, K.M., Shittu, M.D., Azeez, A.D. and Falana,   

             O. (2014); Multistage Dilute Acid Leaching of a Medium Grade Iron Ore to Super- 

   Concentrate, Journal of Mining and Metallurgy, Section A: Mining, 50A(1): 27-37.  

   Yugoslavia.

List of Publications-Dr. Ige O.

        i.            Umoru, L. E., Onike, A., and Ige O. O. (2005): Glucose as a corrosion inhibitor for an aluminium  alloy in 0.1M sodium hydroxide, NSE Technical Transaction, 40(4), 45-52.

      ii.            Umoru, L. E., and Ige, O. O. (2007): Effects of tin on aluminum-zinc-magnesium as sacrificial anode in seawater, Journal of Minerals and Materials Characterization and Engineering, 7(2), 105-113.

    iii.            Ige, O. O., Umoru, L. E., Adeoye, M. O., Adetunji, A. R., Olorunniwo, O. E., and Akomolafe, I. I. (2009): Monitoring, control and prevention practices in corrosion of biomaterials – An overview, Trends Biomater. Artif. Organs. 23(2), 93 – 104. 

    iv.            Ige, O. O., Umoru, L.E., Olorunniwo, O.E., and Adeoye, M. O. (2011): Erosion corrosion in the oil and gas industry: A review, Ife Journal of Technology, 20(1), 58 – 67.

      v.            Akomolafe, I.I. Umoru, L.E. and Ige, O.O., (2011): “Influence of Glass Frits on Working Properties of Kaolins”, Applied Clay Science, 52(4), 428 – 431

    vi.            Ige, O.O., M.D. Shittu, M. D., Oluwasegun, K. M., Olorunniwo, O. E., Umoru, L.E. (2012): Eco-friendly Inhibitors for Erosion-corrosion Mitigation of API-X65 Steel in CO2 Environment, Ife Journal of Technology, 21(2), 43 – 48

  vii.            Ige, O.O., Umoru., Sunday, A. (2012): Natural Products: A Minefield of Biomaterials, International Journal of Biomaterials, Volume 2012, Article ID 983062, 20 pages doi:10.5402/2012/983062

viii.            Umoru, L.E., Oladipo, O., Ige, O.O. (2012): Carbonate Coatings as Protective Barriers for Pipe Borne Water Transport Material, Journal of Minerals and Materials Characterization Engineering, 11(6), 609 – 617

    ix.            Ige, O.O., Barker, R., Hu, X., Umoru, L.E., A. Neville, A. (2013): Assessing the Influence of Shear Stress and Particle Impingement on Inhibitor Efficiency through the Application of In-situ Electrochemistry in a CO2-Saturated Environment, Wear, 304(1-2), 49 – 59

      x.            Oluwasegun, K. M., Olawale, J. O., Adeoye, M. O., Olorunniwo, O. E., Ige, O. O., Atanda, P. O. (2014): Appraisal of Solution Heat Treatment on Elimination of Hafnium Rich Eutectic and Prior Particle Boundary Precipitate in a Superalloy Powder, Materials Performance and Characterization, 3(1), 341 – 354

    xi.            Adamu, A. M., Umoru, L. E., Ige, O. O. (2014): Effect of Toluene and Dioctylphthalate on the Rebar Corrosion of Medium Carbon Steel in Seawater and Cassava Fluid, Journal of Minerals and Materials Characterization Engineering, 2, 1-7

  xii.            Oluwasegun, K. M., Olawale, J. O., Oyatogun, G. M., Shittu, M. D., Ige, O. O., Malomo, B. O. (2014): In Situ Micro-mechanical Testing of a PM Nickel-Base Superalloy Weld, In Situ Micro-mechanical Testing of a PM Nickel-Base Superalloy Weld, Metall and Mat Trans A, 45(11), 5127-5137

xiii.            Oluwasegun, K. M. Olawale, J. O., Ige, O. O., Shittu, M. D., Adeleke, A. A., Malomo, B. O.  (2014): Microstructural characterization of thermomechanical and heat affected zones of an inertia friction welded astrology, Journal of Materials Engineering and Performance, 23(8), 2834-2846

xiv.            Ige, O. O., Umoru, L. E., (2016): Effects of shear stress on the erosion-corrosion behaviour of X- 65 carbon steel: A combined mass-loss and profilometry study, Tribology International, 94:155-164

  xv.            Aribo S, Inegbedion EM, Olusegun SJ, Ige OO, Ogunbadejo AS, Olubambi PA. (2017): Under-deposit corrosion behaviour of API 5L-X65 steel in CO2 environment containing Sida Acuta extract, LEJPT, 1, 265-274.

xvi.            Aribo S, Adeyeye OD, Olusegun SJ, Ige OO, Ogunbadejo AS, Igbafen EO, Olubambi P. A. (2017): Inhibitive performance of Sida acuta and monoethylene glycol on the under deposit corrosion of UNS S30403 stainless steel, The International Journal of Advanced Manufacturing Technology. 1;93(5-8) 1853-8.

xvii.            Oluwasegun, K. M., Olawale, J. O., Shittu, M. D., Ige O.O, Atanda PO, Ajide OO, Osoba LO. (2017): On the Role of Boride in the Structural Integrity of a Turbine Disc Superalloy’s Solid State Weld, American Journal of Materials Engineering and Technology. 5(1):14-23.

xviii.            Aribo, S., Fakorede, A., Ige, O. O., Olubambi, P. A. (2017): Erosion-corrosion behaviour of aluminium alloy 6063 hybrid composite, Wear 376-377 608-614.

xix.            Ige, O. O., Aribo, S., Obadele, B. A., Langa, T., Oluwasegun, K. M., Shongwe, M. B., Olubambi, P. A. (2017): Erosion–corrosion behaviour of spark plasma sintered WC – 12Co in aggressive media, International Journal of Refractory Metals and Hard Materials, 66:36–43.

  xx.            Ige, O. O., Aribo, S., Obadele, B. A., Langa, T., Olubambi, P. A. (2017): Erosion-corrosion characteristics of spark plasma sintered pure nickel in simulated mine water, Tribology International, 109:441– 446.

xxi.            Obadele, B. A., Ige, O. O., Olubambi, P. A. (2017): Fabrication and characterization of titanium-nickel-zirconia matrix composites prepared by spark plasma sintering. Journal of Alloys and Compounds, 710, 825 – 830.

xxii.            Falodun, O. E., Obadele, B. A., Oke, S. R., Ige, O. O., Olubambi P. A., Lethabane, M. L., Bhero,  S. W., (2018):  Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN, Journal of Transactions of Nonferrous Metals Society of China, 28(1): 47-54

xxiii.            Oke, S. R., Ige, O. O., Falodun, E. O., Obadele, B. A., Mphahlele, M. R., Olubambi, P. A. (2018): Influence of sintering process parameters on corrosion and wear behaviour of SAF 2205 reinforced with nano-sized TiN, Materials Chemistry and Physics, 206, 166-173

xxiv.            Moloto, A.K., Seshweni, M.H.E., Mathe, N.J. Obadele, B. A., Aribo, S., Olubambi, P. A., Ige, O. O.  (2018): Influence of Shear Stress on Erosion–Corrosion of Stainless Steels in Simulated Mine Water, J Bio Tribo Corros., 4: 26. https://doi.org/10.1007/s40735-018-0143-2

xxv.            Aribo, S. Adedapo, I. Nwogwugwu, C. Olaniran, O.; Olaseinde, A. Ige, O. Olubambi, P. A. (2018): Erosion-corrosion Behaviour of Dual Phase Medium Carbon Steel using a Designed Slurry Pot, Tribology in Industry, 40(2),239-246
xxvi.            Ogunbadejo, A. S., Aribo, S., Olaseinde, O. A., Ige, O. O., Olubambi, P. (2018): Correlation between repassivation kinetics and pitting potential of 316L stainless steel in the presence of green inhibitors, Pigment & Resin Technology, 47(4):.338-349

1. Aremo, B. and Adeoye, M.O. (2011); Aluminium Countergravity Casting: Potentials and Challenges (Chapter 1), In: Ahmad, Z. (Ed.), Recent Trends in The Casting and Degradation of Aluminium alloys, InTech, Croatia.

2. Makinde O.N., Aremo B.T., Aremo B., Akinkunmi E.O., Balogun F.A., Osinkolu G.A., Siyanbola W.O. (2008); Re-usable low density polyethylene arm glove for puerperal intrauterine exploration, East African Medical Journal, 85(7), pp. 355-361. Kenya.

3. Aremo B. and Adeoye M.O. (2008); Development of a roofing material from polyethylene through the use of additives. Journal of Materials in Civil Engineering, 20(8), pp. 516-520. USA.

4. Aremo B. and Adeoye M.O. (2010); A Quick Test for the Assessment of Weatherability of Polyethylene, Polymers Research Journal, 4(1), pp. 1–8. USA.

5. Aremo B. and Adeoye M.O. (2011); A Low-Cost Vacuum Casting Equipment for Aluminium Alloys, Russian Journal of Non-Ferrous Metals, 51(2), pp. 124–130. Russia

6. Adedayo A.V. and Aremo B. (2011); Influence of Mould Heat Storage Capacity on Properties of Grey Iron, Journal of Minerals & Materials Characterization & Engineering, 10(4), pp. 387-396. China.

7. Oluwasegun K.M., Adeoye M.O., Atanda P.O., Olorunniwo O.E., and Aremo B. (2011); Characterisation of Liquation Products in a Nickel Base Superalloy, Ife Journal of Technology, 20(2), pp. 99-105. Nigeria.

8. Oluwasegun K.M., Adeoye M.O., Adeleke A.A., Aremo B. and Adedayo A.V. (2012); Micro Tensile Characterisation of A Turbine Disc Weld. Nigerian Journal of Materials Science and Engineering, 3(1). pp. 15-23. Nigeria.

9. Isadare A. D., Aremo B., Adeoye M. O., Olawale O. J., and Shittu M. D. (2013); Effect of Heat Treatment on Some Mechanical Properties of 7075 Aluminium Alloy, Materials Research, 16(1): 190-194. Brazil.

10.  Ojo R.T., Edechuku C., Aremo B., Adeoye M. O., and Teniola O. S. (2014); Electroforming of a Complex Mould using an Acid-Mediated Copper Sulphate Bath., Open Journal of Metal, 4, 9-19. China.

11.  Ige, O.O., Babarinde, O. D., Aremo, B., Shittu, M. D., Olawale, O. J., Olorunniwo, and O. E. (2015); Chrysophyllum albidium extracts as corrosion inhibition for aluminium in 0.5 M H2SO4 solution. African Corrosion Journal. 1(2), 42-45. South Africa.

12.  Aremo B., Adeoye M.O. and Obioh I.B. (2015); A Simplified Test Station for Alkaline Fuel Cell. Journal of Fuel Cell Science and Technology, 12, 024501-1 – 024501-7. USA.

13.  O.E. Olorunniwo1, A.P.I. Popoola, B. Aremo and O.O Ige (2015); Corrosion Investigation in Reinforced Concrete Using a Potentiostat. African Corrosion Journal. 1(1), 25-30. South Africa.

14.  Aremo B., Adeoye M.O., Obioh I.B. and Adeboye O.A. (2015); A Simplified Microcontroller-Based Potentiostat for Low-Resource Applications. Open Journal of Metal, 5, 37-46. China

15.  Raheem A., Aremo B., and Adeoye M.O. (2017); A Starch-Based Biodegradable Polyethylene for Municipal Solid Waste Mitigation, Materials Sciences and Applications, 8, 26-36. China.

16.  Aremo B., Adeoye M. O. and Obioh I. B. (2017); Potentiostatic Co-deposition of Nickel and Graphite Using a Composite Counter Electrode, Journal of Nanosciences:Current Research, 2(3). United Kingdom.

17.  Okuwa C. T., and Aremo B. (2017); Development of a 3D Zinc-Entrained Activated Charcoal Anode for Air-Breathing Battery., In: Proceedings Faculty of Technology Conference 2017, Obafemi Awolowo University, Ile-Ife, Osun State, September 24 – 27, Akindahunsi A. A., Ayodele, K.P, Gambo I. P., Sanda O. and Adio S., Eds., pp.353-358. Nigeria.

18.  Aremo B., Adeoye M.O and Oluwasegun K.M. (2012); Design and Construction of a cylindrical Resistance furnace for Non-Ferrous Foundry., In: Proceedings Faculty of Technology Conference 2012, Obafemi Awolowo University, Ile-Ife, Osun State, September 23-27, Betiku, E. and Ogunjimi, L. A. O., Eds., pp. 179-185. Nigeria.

          1.            D. A. Isadare, B. Aremo, M. O. Adeoye, J. O. Olawale and M. D. Shittu (2013). Effect of Heat Treatment on Some Mechanical Properties of 7075 Aluminium Alloy. Materials Research, 16(1): 190-194.   
 

          2.            J. O. Oji, S. G. Datau, K. J. Akinluwade, A. T. Taiwo, D. A. Isadare, S.  H. Pamtoks and A. R.   Adetunji  (2013). Numerical Optimization of Sand Casting Parameters using the Dantzig’s Simplex Method. Journal of Minerals and Materials Characterization and Engineering, 1: 250-256.         

          3.            K. J. Akinluwade, A. R. Adetunji, M. O. Adeoye, L. E. Umoru, A.T. Taiwo, P. N.  Kalu, A. Rominiyi, D. A. Isadare, W. W. Soboyejo and O. O. Adewoye (2013). Light and Electron Microscopy Study of the Visible Diffusion Zone of Mild Steel Pack Cyanided in Processed Cassava Leaves. International Journal of Materials Science and Engineering B, 9(3): 567-570.

          4.            D. A. Isadare, M. O. Adeoye, A. R. Adetunji, K. M.  Oluwasegun and K. J. Akinluwade (2014). Optimization of Mechanical Properties of Age- Hardened 6063 Aluminium Alloy Via Diffusion Annealing. British Journal of Applied Science & Technology, 4(23): 3360-3369.

          5.            K. J. Akinluwade, F. O. Omole, D. A. Isadare, O. S. Adesina and A. R. Adetunji (2015). Material Selection for Heat Sinks in HPC Microchip-Based Circuitries. British Journal of Applied Science & Technology, 7(1): 124-133.

          6.            D. A. Isadare, M. O. Adeoye, A. R. Adetunji, K. M. Oluwasegun, A. L. Rominiyi and K. J. Akinluwade (2015).  Effect of As-Cast Cooling on the Microstructure and Mechanical Properties of Age-Hardened 7000 Series Aluminium Alloy, International Journal of Materials Engineering, 1(5): 5-9.          

          7.            O. O. Olabode, M. O. Ogundare, O. S. Adesina, D. A. Isadare, K. J. Akinluwade, A. T. Taiwo, O. A. Odejobi and A. R. Adetunji (2015). A Microcontroller-based Design for Energy Efficient Nickel-chrome Plating Process. American Chemical Science Journal, 7(2): 91-101.          

          8.            A. R. Adetunji, A. A. Abioye, D. A. Isadare and K. J. Akinluwade (2015). Material Selection for Crusher Jaw in a Jaw Crusher Equipment. International Journal of Materials Engineering, 5(2): 17-22.

          9.            D. A. Isadare, M. O. Adeoye, A. R. Adetunji, K. M. Oluwasegun and K. J. Akinluwade (2015). The Influence of Homogenization Treatment on Aging Response of 6063 Aluminium Alloy. Advances in Research, 5(3): 1-11.

      10.            A. A. Abioye, P. O. Atanda, S. B. Majolagbe, D. A. Isadare, O. P. Abioye, K. J.  Akinluwade and A. R. Adetunji (2015). Material Selection for Gas Turbine Blade Coating Using GRANTA Material Selector. Advances in Research, 5(1): 1-9.

      11.            K. M. Oluwasegun, J. O. Olawale, S. A. Adio, D. A. Isadare and A. A. Daniyan (2016). On the Role of Modified Post Weld Heat Treatment in Eliminating Incipient Melting of Non-equilibrium Product Resulting During Solid-State Welding of Astroloy. Metallurgical and Materials Transactions B, 2(4B).

      12.            E. L. Odekanle, M. A. Adeyeye, F. A. Akeredolu, J. A. Sonibare, I. M. Oloko-Oba, O. E. Abiye, D. A. Isadare and A.A. Daniyan (2017). Variability of Meteorological Factors on In-cabin and Pedestrians Exposures to CO and VOC in South-west Nigeria. Journal of Atmospheric Pollution, 5(1): 1-8.

      13.            K. J. Akinluwade, A. L. Rominiyi, D. A. Isadare, A. R. Adetunji and M. O. Adeoye (2018). Pack-cyaniding: A Comparative Study of Low and High-Temperature Treatment. Archives of Current Research International, 12(2): 1-12.

      14.            K. J. Akinluwade, F. P. Ibitoye, D. A. Isadare, M. O. Adeoye and A. R. Adetunji (2018). Modeling of Heat Transfer in Rotary Furnaces Using Finite Element Approach. Materials Performance and Characterization, 7(1): 59-69.

      15.            D. A. Isadare, M. O. Adeoye, A. R. Adetunji, K. M. Oluwasegun, K. J. Akinluwade and O. S. Adesina (2018). Characterization of Mild Steel Case-hardened in Processed Cassava Leaves. Archives of Current Research International, 14(4): 1-11.

1. Daniyan, A., Ogundare, O., AttahDaniel, B. E., and Babatope, B. (2011). Effect of Palm Oil as Corrosion Inhibitor on Ductile Iron and Mild Steel. The   Pacific Journal of Science and Technology, 12 (2), 45 – 53. USA.
2. Ogundare O. D., Momoh I. M., Akinribide O. J., Daniyan, A. A., Adetunji, A. R., Olusunle, S.O.O. (2013). Effect of Strain Rates on Mild Steel under Tensile Loading. International Journal of Science and Technology 2 (8), 588- 594.
3. Daniyan, A. A., Umoru, L. E. and Olunlade, B. (2013). Preparation of Nano- TiO₂ Thin Film Using Spin Coating Method Journal of Minerals and Materials Characterization and Engineering, 1, 138-144.
4. Daniyan, A. A., Umoru, L. E., Fasasi, A. Y., Borode, J. O., Oluwasegun, K. M. and Olusunle, S. O. O. (2014). Electrical Properties of Nano-TiO₂ Thin Film Using Spin Coating Method Journal of Minerals and Materials Characterization and Engineering,  2, 15-20.
5. Oluwasegun, K. M. Olawale, J. O. Adio, S. A., Isadare,  A. and Daniyan, A. A.  (2016). On the Role of Modified Post Weld Heat Treatment in Eliminating Incipient Melting of Non-equilibrium Product Resulting During Solid – State  Welding of Astroloy Metallurgical and Materials Transaction B.  DOI: 10.1007/s11663-016-0667-0. USA
6. Fayomi, O. S. I., Popoola, A. P. I. and Daniyan, A. A. (2016). Hybrid effect of an in situ multilayer Zn–ZnO–Cr₂O₃ electrodeposited nanocomposite coatings for extended application, Particulate Science and Technology, 35 (4), 418-425, DOI: 10.1080/02726351.2016.1163305, K
7. Alo F. I., Oluyamo S. S., Faromika O. P., Atanda, P. O. Daniyan, A. and        Oluwasegun, K. M. (2017). The Study of Wear and Corrosion Properties of Two       Grades of Carbon Steel Used in Construction Industries in Nigeria. International Journal of Materials Engineering, 7(4), 77-82, DOI: 10.5923/j.ijme.20170704.03. USA
8. Daniyan, A. Umoru, L. E., Popoola, A. P. I. and Fayomi, O. S. I. (2017).        Comparative studies of microstructural, tribological and corrosion properties of        Zn-TiO₂ and Zn-TiO₂-WO₃ nano-composite coatings. Results in Physics, 7 3222–     3229. Netherland
9. Alo, F. I. Atanda, P. O.  Daniyan, A. A., Abodunrin, O. W. and Oluwasegun, K.                        (2017). An Assessment of Imported and Local Constructional Steel in Nigeria: Analysis by One-Way ANOVA. International Journal of Materials Engineering,                              7(3):     45-51. DOI: 10.5923/j.ijme.20170703.01. USA
10. Babatunde, O. G., Fayose, R. S., Daniyan, A. A., Ezenwafor, T. C., Oniya, E. O., Ajayi, N. O., Oluwasegun, K. M., Adedeji, A. O., Ajenifuja, A., Akinseloyin, A. G., Adetunji, A. R., Olusunle, S. O. O. (2017). Development of a Novel         Oven-Furnace. Journal of Minerals and Materials Characterization and Engineering, 5, 62-73. https://doi.org/10.4236/jmmce.2017.5200HYPERLINK “https://doi.org/10.4236/jmmce.2017.52006″6. USA
11. Odekanle, E. L. Adeyeye, M. A.  Akeredolu, F. A.  Sonibare, J. A.  Oloko-Oba, I.                         Abiye, O. E.  Isadare, D. A. Daniyan. A. A. (2017). Variability of            Meteorological Factors on In-cabin and Pedestrians Exposures to CO and VOC in South-west Nigeria. Journal of Atmospheric Pollution, 5, (1), 1-8. DOI:10.12691/jap-5-1-1. USA.
12. Popoola, A. P. I., Daniyan, A., Umoru, L. E., Fayomi, O. S. I. (2017). Effect of WO₃Nanoparticle Loading on the Microstructural, Mechanical and Corrosion Resistance of Zn Matrix/TiO₂-WO₃ Nanocomposite Coatings for Marine Application[J]. Journal of Marine Science and Application, 16(1): 102-109. DOI: 10.1007/s11804-017-1389-7. China.
13. Daniyan A. A, Umoru L. E, Popoola A. P. I. and Fayomi O. S. I. (2018). Opto- electrical and corrosion properties of electrocodeposited Zn-TiO₂/WO₃-ZnO-SnO₂ nanocomposite coatings. Materials and Corrosion., 69 (6) 725-735 https://doi.org/10.1002/maco.201709722.
14. Fayomi O. S. I, Daniyan A. A, Umoru L. E, Popoola A. P. I. (2018). Data on the                         effect of current density relationship on the super-alloy composite coating by electrolytic route. Data in Brief. Data in Brief. 18, 776–780.                                                     https://doi.org/10.1016/j.dib.2018.03.084. USA.
15. Daniyan, A. A., Fayomi O. S. I, Umoru, L. E. Popoola, A. P. I. (2018). Effect of Current Density and ZnO Nano Particles Influence on the Microstructure and Mechanical Strengthening Properties of Zn-TiO₂-ZnO Alloys at Constant Deposition Time. International Journal of Materials Engineering Innovation. 9 (1), 34–45, K.
16. Fayomi, O. S., Bamgboye, O.A., Durodola, B. M., Inam, W. A. Daniyan, A.               (2017). Adsorption and Corrosion Inhibition Properties of Floxapen Compound                               on the Electrochemical Characteristics of Type-A5-series Aluminium in Sodium           Chloride Solution. International Journal of Microstructure and Materials                                             Properties. 12(5-6), pp. 391–401 U.K.
17. Fayomi, O. S. I., Daniyan, A. A. Umoru, L. E. Popoola, A. P. I. (2018)  Study of                        Rapid Thermal Treatment on The Microstructural Evolution and Surface     Characteristics of the Electrodeposited Modify Zn/TiO_{HYPERLINK “https://www.inderscience.com/info/inarticle.php?artid=94775″2}HYPERLINK “https://www.inderscience.com/info/inarticle.php?artid=94775” composite coatings on           AISI 1015 steel. 12 (3), 247–258. DOI: 1504/IJSURFSE.2018.094775. U.K.
18. Daniyan, A. A., Fayomi O. S. I. Umoru, L. E. Popoola, A. P. I. (2018).                Structural Evolution,            Optoelectrical and Corrosion Properties of
    Electrodeposited WO₃ Integration on Zn-TiO₂ Electrolyte for Defence Super Application, Defence Technology 14 (2018) 396 – 402.
19. A. Daniyan L. E. Umoru, A. P. I. Popoola and O. S. I. Fayomi (2018). The Effect of TiO₂ Particulate Reinforcement on the Microstructure and Mechanical           Properties of Binary Nano-Composite on Low Carbon Steel. IOP Conf. Series:          Materials Science and Engineering 391 (2018) 012002         doi:10.1088/1757- 899X/391/1/012002. U.K.